Optimiser vitesse démarrage PC

Le problème exposé dans ce sujet a été résolu.

Bonjour,

On m’a transmis un ordinateur au boulot. Bien qu’il soit plus récent et puissant (et que c’est un Windows, avec un démarrage différent), j’ai pris conscience que mon PC perso est lent à démarrer. Une idée comment optimiser ça ?

Après, s’il y a rien à faire, sauf mettre un SSD, je me contenterais de cette réponse.

En vous remerciant

systemd-analyze time

Startup finished in 3.961s (firmware) + 16.324s (loader) + 7.975s (kernel) + 1min 59.440s (userspace) = 2min 27.701s 
graphical.target reached after 1min 47.600s in userspace

systemd-analyze blame

44.473s udisks2.service
33.320s logrotate.service
31.856s networkd-dispatcher.service
28.628s ModemManager.service
27.068s NetworkManager-wait-online.service
24.316s accounts-daemon.service
23.221s dev-sda2.device
22.821s systemd-journal-flush.service
21.442s polkit.service
20.602s ubuntu-system-adjustments.service
20.400s avahi-daemon.service
20.398s bluetooth.service
19.842s systemd-logind.service
19.840s thermald.service
19.827s wpa_supplicant.service
18.930s NetworkManager.service
16.652s nmbd.service
12.260s systemd-udevd.service
11.999s cups.service
10.203s systemd-resolved.service
10.049s smartmontools.service
 9.598s gpu-manager.service
 9.422s tor@default.service
 8.397s unbound.service
 7.501s phpsessionclean.service
 7.378s apache2.service
 6.244s networking.service
 6.225s ufw.service
 4.552s smbd.service
 4.174s rsyslog.service
 4.161s resolvconf-pull-resolved.service
 3.870s apparmor.service
 3.737s systemd-tmpfiles-setup.service
 2.974s tlp.service
 2.904s lightdm.service
 2.902s plymouth-quit-wait.service
 2.849s systemd-tmpfiles-setup-dev.service
 2.666s grub-common.service
 2.658s systemd-modules-load.service
 2.174s systemd-sysctl.service
 2.084s grub-initrd-fallback.service
 1.485s alsa-restore.service
 1.438s e2scrub_reap.service
 1.316s plymouth-start.service
 1.147s systemd-random-seed.service
 1.068s systemd-sysusers.service
 1.005s lm-sensors.service
  929ms update-notifier-download.service
  909ms binfmt-support.service
  894ms hddtemp.service
  894ms tor.service
  859ms systemd-backlight@backlight:intel_backlight.service
  802ms user@1000.service
  717ms kerneloops.service
  710ms swapfile.swap
  588ms keyboard-setup.service
  570ms upower.service
  533ms ifupdown-pre.service
  490ms systemd-fsck@dev-disk-by\x2duuid-F878\x2d9236.service
  447ms setvtrgb.service
  437ms console-setup.service
  428ms casper-md5check.service
  406ms systemd-timesyncd.service
  367ms dev-hugepages.mount
  364ms dev-mqueue.mount
  361ms sys-kernel-debug.mount
  359ms sys-kernel-tracing.mount
  353ms geoclue.service
  352ms systemd-journald.service
  348ms kmod-static-nodes.service
  347ms lvm2-monitor.service
  346ms modprobe@configfs.service
  345ms modprobe@drm.service
  343ms modprobe@fuse.service
  308ms systemd-binfmt.service
  279ms dns-clean.service
  274ms finalrd.service
  245ms systemd-udev-trigger.service
  184ms plymouth-read-write.service
  157ms flatpak-system-helper.service
  148ms systemd-update-utmp.service
  107ms blueman-mechanism.service
  100ms proc-sys-fs-binfmt_misc.mount
   96ms rtkit-daemon.service
   68ms systemd-remount-fs.service
   48ms boot-efi.mount
   37ms systemd-user-sessions.service
   11ms systemd-update-utmp-runlevel.service
    9ms user-runtime-dir@1000.service
    4ms openvpn.service
    4ms modprobe@efi_pstore.service
    4ms sys-fs-fuse-connections.mount
    2ms sys-kernel-config.mount
  115us blk-availability.service

systemd-analyze critical-chain

The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.

graphical.target @1min 47.600s
└─multi-user.target @1min 47.599s
  └─smbd.service @1min 43.042s +4.552s
    └─nmbd.service @1min 26.388s +16.652s
      └─network-online.target @1min 25.495s
        └─NetworkManager-wait-online.service @58.426s +27.068s
          └─NetworkManager.service @39.493s +18.930s
            └─network-pre.target @39.488s
              └─ufw.service @33.241s +6.225s
                └─local-fs.target @32.874s
                  └─boot-efi.mount @32.825s +48ms
                    └─systemd-fsck@dev-disk-by\x2duuid-F878\x2d9236.service @32.333s +490ms
                      └─dev-disk-by\x2duuid-F878\x2d9236.device @32.332s

journalctl -b | grep udisks

nov. 08 17:59:13 laptop udisksd[929]: udisks daemon version 2.9.4 starting
nov. 08 17:59:34 laptop udisksd[929]: failed to load module mdraid: libbd_mdraid.so.2: cannot open shared object file: No such file or directory
nov. 08 17:59:37 laptop udisksd[929]: Failed to load the 'mdraid' libblockdev plugin
nov. 08 17:59:59 laptop udisksd[929]: Acquired the name org.freedesktop.UDisks2 on the system message bus
nov. 08 18:01:10 laptop dbus-daemon[1719]: [session uid=1000 pid=1719] Activating via systemd: service name='org.gtk.vfs.UDisks2VolumeMonitor' unit='gvfs-udisks2-volume-monitor.service' requested by ':1.25' (uid=1000 pid=1888 comm="csd-automount " label="unconfined")
+0 -0

Y a quelques services que je ne connais pas comme nmbd, je suis étonné de voir tor et openvpn en même temps mais je pense que tu sais retirer les composants que tu n’utilises pas au quotidien.

Par exemple, je ne lance pas cups au démarrage mais seulement quand j’ai besoin d’imprimer personnellement. Idem pour tor, mais je comprends quelqu’un qui voudrait que ça soit prêt quand dès qu’elle ou il en a besoin.

Je suis étonné tout de même de voir nmbd dans la chaîne critique. Si c’est vraiment un service type Samba, je pense que tu peux le supprimer ou au moins le bouger de la chaîne critique (jouer avec ses dépendances je suppose).

Ici, l’utilisation d’un SSD est ce qui te fera gagner le plus de temps et de loin.

+5 -0

Salut :)

Il serait intéressant d’avoir des infos plus précises à propos de ce PC portable (ses marque et modèle exactes), de l’OS (lequel ? 32bit ou 64bit ?) et de l’utilisation pour correctement te répondre.

En attendant, si le PC portable est équipé d’un HDD, tout à fait d’accords avec ache, le remplacer par un SSD permettrait de lui redonner un bon coup de boost.

+0 -0

Tout cela me paraît bien long même pour un disque dur à dire vrai. Il faudrait une description de la machine complète comme indiqué plus haut.

Par exemple thermald qui prend 20 secondes alors que c’est un peu démon qui tourne en arrière plan qui n’est pas bien gros à charger depuis le disque dur et consomme peu de ressources ça me paraît énorme. À titre d’exemple sur mon ordinateur avec SSD certes ça a pris… 56 millisecondes pour le charger. Je veux bien que le SSD améliore les choses mais là c’est quand même gros. En fait la plupart des outils qui prennent plus d’une dizaine de seconde sont assez suspects niveau lenteur même avec un disque dur.

En plus de ceux soulevés par ache, à quoi te sert phpsessionclean ? Tu pourrais peut être le couper aussi

+3 -0

Pour le coup, ça ne me choque que moyennement. Le temps indiqué correspond à la différence entre le démarrage et le temps effectif du lancement du service. Ce qui inclue du coup, le temps d’attente des dépendances précédente lancées.

Note that the output might be misleading as the initialization of one service might be slow simply because it waits for the initialization of another service to complete.

Même en considérant ça, il est vrai que c’est long. Je mets ça sur le dos du fait que ça fait beaucoup de processus concurrents, tant pour le CPU que pour le disque. Avec un SSD, je suis assez confiant qu’il passera sous la barre des 30s.

+1 -0

Visiblement (vu la "critical chain") ton PC attend d’être connecté à internet (ou de timeout) pour te permettre de te connecter à ta session utilisateur. C’est bizarre, je ne vois pas de raison de faire ça pour un ordinateur personnel. (En entreprise il y a des systèmes de gestion centralisée des identités qui passent par le réseau.).

Il faut que tu comprennes d’où vient ta dépendance au réseau et que tu la vires — il suffit peut-être de couper smbd au démarrage ? D’après les nombres de la "critical chain", tu mets 33s à avoir accès au disque et 1m10s pour avoir accès au réseau (entre ufw et smbd). Ça ne veut pas dire que tu booterais en 35s seulement après avoir viré le réseau (d’autres chaînes plus lentes deviendraient la chaîne critique), mais les gains pourraient être considérables quand même.

+4 -0

Ce n’est pas de toute première jeunesse mais ça me semble largement suffisant pour booter bien plus vite que cela.

D’autant qu’apparemment c’est un disque dur hybride. Le processeur est bien assez performant, la RAM sans doute un poil faible pour pas mal d’usages mais pour le boot cela ne devrait pas avoir d’impact.

Ma fille qui a un fixe bien plus vieux a des caractéristiques bien plus faibles et sa machine démarre plus vite que cela (avec Fedora).

Il faut que tu comprennes d’où vient ta dépendance au réseau et que tu la vires — il suffit peut-être de couper smbd au démarrage ?

Étant donnée la nature de smbd c’est fort probable. S’il n’est pas nécessaire le couper est le mieux (ou le lancer automatiquement quand l’utilisateur se connecte).

Mais malgré tout je persiste que certains services sont vraiment lents comme thermald qui ont peu ou aucune dépendance réelle et est un petit binaire à lancer.

Peut être vérifier avec dmesg s’il y a un problème matériel, regarder la sortie de journalctl -xe s’il y a des erreurs importantes,

Tu peux aussi regarder du côté de l’état du disque dur avec sudo smartctl -a <chemin vers le disque dur> (le chemin étant probablement /dev/sda). S’il a des défauts majeurs qui peuvent expliquer une éventuelle lenteur.

Et bien sûr désactiver les services probablement inutiles (en tout cas durant le boot, après c’est autre chose) qu’on a mentionné pour voir l’impact.

+2 -0

Ça n’a pas été mentionné mais pour afficher les dépendances là commande est systemctl list-dependencies

Donc ici, ça pourrait être intéressant de regarder les dépendances de nmbd et plus grossièrement de graphical.target.

  • systemctl list-dependencies graphical.target
  • systemctl list-dependencies nmbd.service
+2 -0

Hum… déjà, je confirme, remplacer le SSHD (mieux qu’un HDD mais pas aussi bien qu’un vrai SSD) par un SSD ne serait vraiment pas du luxe. Par contre, ton PC portable étant équipé d’un emplacement pour SSD SATA de 2,5" + d’un emplacement pour SSD M.2 SATA, il serait pas mal de savoir si il serait possible de booter sur ce dernier. Après, ces derniers étant généralement plus chers, pour le moment, le meilleur choix serait donc probablement un CRUCIAL 1To MX500… il suffira de cloner le SSHD dessus (c’est assez facile à faire, cf. ce tuto).

Enfin, il me semblerait pas mal de passer à au moins 8Go de RAM soit en rajoutant une 2nde barrette de 4Go (exactement la même que l’actuelle afin d’éviter tout problème de compatibilité… si tu arrives à la trouver), soit en la remplaçant par un tout nouveau kit de 2x4Go (toujours en PC4–19.200… ou supérieur car la PC4–25.600 semble à peine plus chère et pourrait permettre un p’tit gain de performances).

+1 -0

Visiblement (vu la "critical chain") ton PC attend d’être connecté à internet (ou de timeout) pour te permettre de te connecter à ta session utilisateur. C’est bizarre, je ne vois pas de raison de faire ça pour un ordinateur personnel. (En entreprise il y a des systèmes de gestion centralisée des identités qui passent par le réseau.).

gasche

Avoir du réseau permet de faire une première synchronisation d’horloge, pour éviter un saut dans le temps (si la RTC ne fonctionne pas / a drifté / autre raison) alors que tout le userspace est en route. Des programmes pourraient mal gérer cela, et les timestamps dans le système de fichier seraient tous potentiellement erronés. Je ne sais pas si c’est la raison pour l’attente dans ce cas. man NetworkManager-wait-online.service semble indiquer que c’est uniquement si certains services ont explicitement besoin de réseau.

Par contre, c’est étrange que nmbd & smbd soient des dépendances de multi-user.target. Peut-être un filesystème en réseau dans /etc/fstab ?

+0 -0

Si tu clones le disque dur, il faut juste penser à modifier le fstab pour qu’il gère correctement les partitions. Il y a aussi des paramètres de gestion du disque dur qui peuvent changer. Et même le bootloader, de toute façon, je ne suis pas sûr qu’il apprécie. À moins que Mint ne gère tout ça de manière automatique, mais j’en doute.

+0 -0

Voici les sorties :

Alors voici les sorties demandées, si vous voyez quelque chose (moi tout me semble bien) :

dmesg

[    0.000000] microcode: microcode updated early to revision 0xf4, date = 2023-02-23
[    0.000000] Linux version 5.15.0-88-generic (buildd@lcy02-amd64-058) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #98-Ubuntu SMP Mon Oct 2 15:18:56 UTC 2023 (Ubuntu 5.15.0-88.98-generic 5.15.126)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-88-generic root=UUID=76ab16d4-9c6b-46a6-82c4-1a850e1333b6 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000078081fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078082000-0x0000000078082fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000078083000-0x0000000078083fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078084000-0x000000008910ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000089110000-0x0000000089fb5fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000089fb6000-0x000000008a5f8fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008a5f9000-0x000000008a683fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008a684000-0x000000008affdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008affe000-0x000000008affefff] usable
[    0.000000] BIOS-e820: [mem 0x000000008afff000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x6fba1018-0x6fbb1057] usable ==> usable
[    0.000000] e820: update [mem 0x6fba1018-0x6fbb1057] usable ==> usable
[    0.000000] e820: update [mem 0x6fb93018-0x6fba0857] usable ==> usable
[    0.000000] e820: update [mem 0x6fb93018-0x6fba0857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006fb93017] usable
[    0.000000] reserve setup_data: [mem 0x000000006fb93018-0x000000006fba0857] usable
[    0.000000] reserve setup_data: [mem 0x000000006fba0858-0x000000006fba1017] usable
[    0.000000] reserve setup_data: [mem 0x000000006fba1018-0x000000006fbb1057] usable
[    0.000000] reserve setup_data: [mem 0x000000006fbb1058-0x0000000078081fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000078082000-0x0000000078082fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000078083000-0x0000000078083fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000078084000-0x000000008910ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000089110000-0x0000000089fb5fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000089fb6000-0x000000008a5f8fff] usable
[    0.000000] reserve setup_data: [mem 0x000000008a5f9000-0x000000008a683fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000008a684000-0x000000008affdfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008affe000-0x000000008affefff] usable
[    0.000000] reserve setup_data: [mem 0x000000008afff000-0x000000008fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000016effffff] usable
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi: TPMFinalLog=0x8a654000 ACPI 2.0=0x8a5f9000 ACPI=0x8a5f9000 SMBIOS=0x8ae96000 SMBIOS 3.0=0x8ae95000 ESRT=0x863bcb98 MEMATTR=0x8627d018 MOKvar=0x8ac13000 TPMEventLog=0x78162018 
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Notebook                         N230WU                         /N230WU                         , BIOS 5.12 03/28/2018
[    0.000000] tsc: Detected 1800.000 MHz processor
[    0.002189] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002195] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002217] last_pfn = 0x16f000 max_arch_pfn = 0x400000000
[    0.002538] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.004142] last_pfn = 0x8afff max_arch_pfn = 0x400000000
[    0.031667] esrt: Reserving ESRT space from 0x00000000863bcb98 to 0x00000000863bcbd0.
[    0.031676] e820: update [mem 0x863bc000-0x863bcfff] usable ==> reserved
[    0.031714] Using GB pages for direct mapping
[    0.033437] secureboot: Secure boot disabled
[    0.033438] RAMDISK: [mem 0x6fbb2000-0x768fafff]
[    0.033451] ACPI: Early table checksum verification disabled
[    0.033456] ACPI: RSDP 0x000000008A5F9000 000024 (v02 ALASKA)
[    0.033464] ACPI: XSDT 0x000000008A5F90A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.033474] ACPI: FACP 0x000000008A6172E8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.033484] ACPI: DSDT 0x000000008A5F91F0 01E0F4 (v02 ALASKA A M I    01072009 INTL 20160422)
[    0.033491] ACPI: FACS 0x000000008A653F00 000040
[    0.033496] ACPI: APIC 0x000000008A617400 0000BC (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.033502] ACPI: FPDT 0x000000008A6174C0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.033508] ACPI: FIDT 0x000000008A617508 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.033514] ACPI: MCFG 0x000000008A6175A8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.033520] ACPI: SSDT 0x000000008A6175E8 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.033527] ACPI: SSDT 0x000000008A617948 00149E (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.033533] ACPI: HPET 0x000000008A618DE8 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[    0.033539] ACPI: UEFI 0x000000008A618E20 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.033545] ACPI: SSDT 0x000000008A618E68 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.033551] ACPI: SSDT 0x000000008A61A618 0009CF (v02 CtdpB  CtdpB    00001000 INTL 20160422)
[    0.033558] ACPI: SSDT 0x000000008A61AFE8 00165F (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.033565] ACPI: DBGP 0x000000008A61C648 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.033571] ACPI: DBG2 0x000000008A61C680 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.033577] ACPI: DMAR 0x000000008A61C6D8 0000CC (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.033583] ACPI: BGRT 0x000000008A61C7A8 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.033589] ACPI: TPM2 0x000000008A61C7E0 000034 (v03 ALASKA A M I    00000001 AMI  00000000)
[    0.033595] ACPI: ASF! 0x000000008A61C818 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.033601] ACPI: WSMT 0x000000008A61C8B8 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.033606] ACPI: Reserving FACP table memory at [mem 0x8a6172e8-0x8a6173fb]
[    0.033609] ACPI: Reserving DSDT table memory at [mem 0x8a5f91f0-0x8a6172e3]
[    0.033612] ACPI: Reserving FACS table memory at [mem 0x8a653f00-0x8a653f3f]
[    0.033614] ACPI: Reserving APIC table memory at [mem 0x8a617400-0x8a6174bb]
[    0.033616] ACPI: Reserving FPDT table memory at [mem 0x8a6174c0-0x8a617503]
[    0.033618] ACPI: Reserving FIDT table memory at [mem 0x8a617508-0x8a6175a3]
[    0.033620] ACPI: Reserving MCFG table memory at [mem 0x8a6175a8-0x8a6175e3]
[    0.033622] ACPI: Reserving SSDT table memory at [mem 0x8a6175e8-0x8a617940]
[    0.033624] ACPI: Reserving SSDT table memory at [mem 0x8a617948-0x8a618de5]
[    0.033626] ACPI: Reserving HPET table memory at [mem 0x8a618de8-0x8a618e1f]
[    0.033628] ACPI: Reserving UEFI table memory at [mem 0x8a618e20-0x8a618e61]
[    0.033630] ACPI: Reserving SSDT table memory at [mem 0x8a618e68-0x8a61a615]
[    0.033632] ACPI: Reserving SSDT table memory at [mem 0x8a61a618-0x8a61afe6]
[    0.033634] ACPI: Reserving SSDT table memory at [mem 0x8a61afe8-0x8a61c646]
[    0.033636] ACPI: Reserving DBGP table memory at [mem 0x8a61c648-0x8a61c67b]
[    0.033639] ACPI: Reserving DBG2 table memory at [mem 0x8a61c680-0x8a61c6d3]
[    0.033641] ACPI: Reserving DMAR table memory at [mem 0x8a61c6d8-0x8a61c7a3]
[    0.033643] ACPI: Reserving BGRT table memory at [mem 0x8a61c7a8-0x8a61c7df]
[    0.033645] ACPI: Reserving TPM2 table memory at [mem 0x8a61c7e0-0x8a61c813]
[    0.033647] ACPI: Reserving ASF! table memory at [mem 0x8a61c818-0x8a61c8b7]
[    0.033649] ACPI: Reserving WSMT table memory at [mem 0x8a61c8b8-0x8a61c8df]
[    0.034389] No NUMA configuration found
[    0.034391] Faking a node at [mem 0x0000000000000000-0x000000016effffff]
[    0.034410] NODE_DATA(0) allocated [mem 0x16efd6000-0x16effffff]
[    0.035088] Zone ranges:
[    0.035090]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.035094]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.035097]   Normal   [mem 0x0000000100000000-0x000000016effffff]
[    0.035100]   Device   empty
[    0.035102] Movable zone start for each node
[    0.035107] Early memory node ranges
[    0.035108]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.035111]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.035113]   node   0: [mem 0x0000000000100000-0x0000000078081fff]
[    0.035116]   node   0: [mem 0x0000000078084000-0x000000008910ffff]
[    0.035117]   node   0: [mem 0x0000000089fb6000-0x000000008a5f8fff]
[    0.035119]   node   0: [mem 0x000000008affe000-0x000000008affefff]
[    0.035121]   node   0: [mem 0x0000000100000000-0x000000016effffff]
[    0.035124] Initmem setup node 0 [mem 0x0000000000001000-0x000000016effffff]
[    0.035131] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.035135] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.035186] On node 0, zone DMA: 98 pages in unavailable ranges
[    0.042162] On node 0, zone DMA32: 2 pages in unavailable ranges
[    0.042285] On node 0, zone DMA32: 3750 pages in unavailable ranges
[    0.042355] On node 0, zone DMA32: 2565 pages in unavailable ranges
[    0.048587] On node 0, zone Normal: 20481 pages in unavailable ranges
[    0.048694] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.048708] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
[    0.048954] ACPI: PM-Timer IO Port: 0x1808
[    0.048966] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.048970] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.048972] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.048974] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.048975] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.048977] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.048979] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.048980] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.049008] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.049014] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.049018] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.049025] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.049027] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.049039] e820: update [mem 0x8614e000-0x8622ffff] usable ==> reserved
[    0.049067] TSC deadline timer available
[    0.049069] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.049107] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.049111] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.049115] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.049119] PM: hibernation: Registered nosave memory: [mem 0x6fb93000-0x6fb93fff]
[    0.049122] PM: hibernation: Registered nosave memory: [mem 0x6fba0000-0x6fba0fff]
[    0.049124] PM: hibernation: Registered nosave memory: [mem 0x6fba1000-0x6fba1fff]
[    0.049128] PM: hibernation: Registered nosave memory: [mem 0x6fbb1000-0x6fbb1fff]
[    0.049131] PM: hibernation: Registered nosave memory: [mem 0x78082000-0x78082fff]
[    0.049133] PM: hibernation: Registered nosave memory: [mem 0x78083000-0x78083fff]
[    0.049137] PM: hibernation: Registered nosave memory: [mem 0x8614e000-0x8622ffff]
[    0.049140] PM: hibernation: Registered nosave memory: [mem 0x863bc000-0x863bcfff]
[    0.049144] PM: hibernation: Registered nosave memory: [mem 0x89110000-0x89fb5fff]
[    0.049148] PM: hibernation: Registered nosave memory: [mem 0x8a5f9000-0x8a683fff]
[    0.049149] PM: hibernation: Registered nosave memory: [mem 0x8a684000-0x8affdfff]
[    0.049153] PM: hibernation: Registered nosave memory: [mem 0x8afff000-0x8fffffff]
[    0.049155] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.049157] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.049158] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.049160] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.049161] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.049163] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.049165] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.049166] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.049168] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.049170] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.049171] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.049173] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.049176] [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.049178] Booting paravirtualized kernel on bare hardware
[    0.049182] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.049194] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.049512] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[    0.049527] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[    0.049532] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.049592] Built 1 zonelists, mobility grouping on.  Total pages: 1001524
[    0.049596] Policy zone: Normal
[    0.049598] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-88-generic root=UUID=76ab16d4-9c6b-46a6-82c4-1a850e1333b6 ro quiet splash
[    0.049711] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-88-generic", will be passed to user space.
[    0.050056] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.050251] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.050608] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.080724] Memory: 3696312K/4070328K available (16393K kernel code, 4393K rwdata, 10872K rodata, 3356K init, 18716K bss, 373756K reserved, 0K cma-reserved)
[    0.082685] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.082756] Kernel/User page tables isolation: enabled
[    0.082853] ftrace: allocating 50664 entries in 198 pages
[    0.127196] ftrace: allocated 198 pages with 4 groups
[    0.127521] rcu: Hierarchical RCU implementation.
[    0.127523] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.127526] 	Rude variant of Tasks RCU enabled.
[    0.127527] 	Tracing variant of Tasks RCU enabled.
[    0.127528] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.127530] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.136857] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.137256] random: crng init done
[    0.137305] Console: colour dummy device 80x25
[    0.137337] printk: console [tty0] enabled
[    0.137368] ACPI: Core revision 20210730
[    0.137673] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.137746] APIC: Switch to symmetric I/O mode setup
[    0.137749] DMAR: Host address width 39
[    0.137751] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.137760] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.137765] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.137771] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.137774] DMAR: RMRR base: 0x0000008991a000 end: 0x00000089939fff
[    0.137777] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
[    0.137779] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.137783] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.137785] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.137787] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.139584] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.139587] x2apic enabled
[    0.139601] Switched APIC routing to cluster x2apic.
[    0.143685] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.161718] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
[    0.161728] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=7200000)
[    0.161761] x86/cpu: SGX disabled by BIOS.
[    0.161775] CPU0: Thermal monitoring enabled (TM1)
[    0.161882] process: using mwait in idle threads
[    0.161886] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.161888] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.161896] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.161900] Spectre V2 : Mitigation: IBRS
[    0.161901] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.161903] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.161905] RETBleed: Mitigation: IBRS
[    0.161907] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.161909] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.161912] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.161924] MDS: Mitigation: Clear CPU buffers
[    0.161926] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.161934] SRBDS: Mitigation: Microcode
[    0.161948] GDS: Mitigation: Microcode
[    0.161965] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.161969] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.161971] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.161973] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.161975] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.161980] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.161984] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.161987] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.161990] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.215934] Freeing SMP alternatives memory: 44K
[    0.215938] pid_max: default: 32768 minimum: 301
[    0.219958] LSM: Security Framework initializing
[    0.219978] landlock: Up and running.
[    0.219980] Yama: becoming mindful.
[    0.220011] AppArmor: AppArmor initialized
[    0.220070] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.220081] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.221816] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1934
[    0.221832] smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[    0.222083] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.222104] ... version:                4
[    0.222105] ... bit width:              48
[    0.222107] ... generic registers:      4
[    0.222108] ... value mask:             0000ffffffffffff
[    0.222110] ... max period:             00007fffffffffff
[    0.222112] ... fixed-purpose events:   3
[    0.222113] ... event mask:             000000070000000f
[    0.222273] signal: max sigframe size: 2032
[    0.222312] rcu: Hierarchical SRCU implementation.
[    0.224026] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.224152] smp: Bringing up secondary CPUs ...
[    0.224320] x86: Booting SMP configuration:
[    0.224322] .... node  #0, CPUs:      #1 #2 #3 #4
[    0.238556] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.238556] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.238556]  #5 #6 #7
[    0.238635] smp: Brought up 1 node, 8 CPUs
[    0.238635] smpboot: Max logical packages: 1
[    0.238635] smpboot: Total of 8 processors activated (28800.00 BogoMIPS)
[    0.242082] devtmpfs: initialized
[    0.242082] x86/mm: Memory block size: 128MB
[    0.242630] ACPI: PM: Registering ACPI NVS region [mem 0x78082000-0x78082fff] (4096 bytes)
[    0.242630] ACPI: PM: Registering ACPI NVS region [mem 0x8a5f9000-0x8a683fff] (569344 bytes)
[    0.242630] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.242630] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.242630] pinctrl core: initialized pinctrl subsystem
[    0.242630] PM: RTC time: 17:02:50, date: 2023-11-09
[    0.242630] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.242843] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.242899] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.242953] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.242965] audit: initializing netlink subsys (disabled)
[    0.242976] audit: type=2000 audit(1699549370.104:1): state=initialized audit_enabled=0 res=1
[    0.242976] thermal_sys: Registered thermal governor 'fair_share'
[    0.242976] thermal_sys: Registered thermal governor 'bang_bang'
[    0.242976] thermal_sys: Registered thermal governor 'step_wise'
[    0.242976] thermal_sys: Registered thermal governor 'user_space'
[    0.242976] thermal_sys: Registered thermal governor 'power_allocator'
[    0.242976] EISA bus registered
[    0.242976] cpuidle: using governor ladder
[    0.242976] cpuidle: using governor menu
[    0.242976] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.242976] ACPI: bus type PCI registered
[    0.242976] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.242976] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.242976] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.242976] PCI: Using configuration type 1 for base access
[    0.242976] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.248608] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.248615] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.248615] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.249859] fbcon: Taking over console
[    0.249885] ACPI: Added _OSI(Module Device)
[    0.249888] ACPI: Added _OSI(Processor Device)
[    0.249890] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.249892] ACPI: Added _OSI(Processor Aggregator Device)
[    0.249894] ACPI: Added _OSI(Linux-Dell-Video)
[    0.249896] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.249899] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.323802] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.337767] ACPI: Dynamic OEM Table Load:
[    0.337780] ACPI: SSDT 0xFFFF8B288143A000 00058B (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.340860] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[    0.343071] ACPI: Dynamic OEM Table Load:
[    0.343083] ACPI: SSDT 0xFFFF8B288112DC00 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.347080] ACPI: Dynamic OEM Table Load:
[    0.347093] ACPI: SSDT 0xFFFF8B2880152000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.352022] ACPI: Dynamic OEM Table Load:
[    0.352032] ACPI: SSDT 0xFFFF8B288112EC00 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.354985] ACPI: Dynamic OEM Table Load:
[    0.354995] ACPI: SSDT 0xFFFF8B288112C800 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.364087] ACPI: EC: EC started
[    0.364090] ACPI: EC: interrupt blocked
[    0.366590] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.366595] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.366598] ACPI: Interpreter enabled
[    0.366681] ACPI: PM: (supports S0 S3 S4 S5)
[    0.366683] ACPI: Using IOAPIC for interrupt routing
[    0.366767] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.366770] PCI: Using E820 reservations for host bridge windows
[    0.367887] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.411055] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.411068] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.411618] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.412141] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
[    0.412144] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.413619] PCI host bridge to bus 0000:00
[    0.413626] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.413630] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.413634] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.413637] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[    0.413640] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.413643] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.413827] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[    0.414427] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[    0.414444] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[    0.414455] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.414463] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.414491] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.414498] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.415243] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.415269] pci 0000:00:14.0: reg 0x10: [mem 0xdfb10000-0xdfb1ffff 64bit]
[    0.415358] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.417144] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.417170] pci 0000:00:14.2: reg 0x10: [mem 0xdfb2f000-0xdfb2ffff 64bit]
[    0.417834] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.418058] pci 0000:00:15.0: reg 0x10: [mem 0xdfb2e000-0xdfb2efff 64bit]
[    0.419777] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.419806] pci 0000:00:16.0: reg 0x10: [mem 0xdfb2d000-0xdfb2dfff 64bit]
[    0.419899] pci 0000:00:16.0: PME# supported from D3hot
[    0.421024] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.421045] pci 0000:00:17.0: reg 0x10: [mem 0xdfb28000-0xdfb29fff]
[    0.421056] pci 0000:00:17.0: reg 0x14: [mem 0xdfb2c000-0xdfb2c0ff]
[    0.421067] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.421077] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.421088] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.421098] pci 0000:00:17.0: reg 0x24: [mem 0xdfb2b000-0xdfb2b7ff]
[    0.421155] pci 0000:00:17.0: PME# supported from D3hot
[    0.422101] pci 0000:00:1c.0: [8086:9d13] type 01 class 0x060400
[    0.422217] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.423784] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.423886] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.425420] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.426412] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.426431] pci 0000:00:1f.2: reg 0x10: [mem 0xdfb24000-0xdfb27fff]
[    0.427336] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.427364] pci 0000:00:1f.3: reg 0x10: [mem 0xdfb20000-0xdfb23fff 64bit]
[    0.427396] pci 0000:00:1f.3: reg 0x20: [mem 0xdfb00000-0xdfb0ffff 64bit]
[    0.427458] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.429403] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.429466] pci 0000:00:1f.4: reg 0x10: [mem 0xdfb2a000-0xdfb2a0ff 64bit]
[    0.429537] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.430351] pci 0000:01:00.0: [8086:24fd] type 00 class 0x028000
[    0.430405] pci 0000:01:00.0: reg 0x10: [mem 0xdfa00000-0xdfa01fff 64bit]
[    0.430640] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.430987] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.430995] pci 0000:00:1c.0:   bridge window [mem 0xdfa00000-0xdfafffff]
[    0.431145] acpiphp: Slot [1] registered
[    0.431202] pci 0000:02:00.0: [10ec:5287] type 00 class 0xff0000
[    0.431225] pci 0000:02:00.0: reg 0x10: [mem 0xdf015000-0xdf015fff]
[    0.431277] pci 0000:02:00.0: reg 0x30: [mem 0xdf000000-0xdf00ffff pref]
[    0.431396] pci 0000:02:00.0: supports D1 D2
[    0.431399] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.431643] pci 0000:02:00.1: [10ec:8168] type 00 class 0x020000
[    0.431669] pci 0000:02:00.1: reg 0x10: [io  0xe000-0xe0ff]
[    0.431702] pci 0000:02:00.1: reg 0x18: [mem 0xdf014000-0xdf014fff 64bit]
[    0.431722] pci 0000:02:00.1: reg 0x20: [mem 0xdf010000-0xdf013fff 64bit]
[    0.431849] pci 0000:02:00.1: supports D1 D2
[    0.431851] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.432063] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.432069] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.432074] pci 0000:00:1c.4:   bridge window [mem 0xdf000000-0xdf9fffff]
[    0.432080] pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[    0.434986] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[    0.435127] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.435264] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.435399] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.435535] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[    0.435670] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[    0.435805] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.435940] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.437148] ACPI: EC: interrupt unblocked
[    0.437150] ACPI: EC: event unblocked
[    0.437162] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.437164] ACPI: EC: GPE=0x50
[    0.437167] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[    0.437171] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[    0.437319] iommu: Default domain type: Translated 
[    0.437319] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.437319] SCSI subsystem initialized
[    0.437770] libata version 3.00 loaded.
[    0.437793] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.437793] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.437793] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.437793] vgaarb: loaded
[    0.437793] ACPI: bus type USB registered
[    0.437807] usbcore: registered new interface driver usbfs
[    0.437821] usbcore: registered new interface driver hub
[    0.437832] usbcore: registered new device driver usb
[    0.437871] pps_core: LinuxPPS API ver. 1 registered
[    0.437873] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.437881] PTP clock support registered
[    0.437903] EDAC MC: Ver: 3.0.0
[    0.437903] Registered efivars operations
[    0.438003] NetLabel: Initializing
[    0.438005] NetLabel:  domain hash size = 128
[    0.438007] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.438040] NetLabel:  unlabeled traffic allowed by default
[    0.438065] PCI: Using ACPI for IRQ routing
[    0.466860] PCI: pci_cache_line_size set to 64 bytes
[    0.466963] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.466967] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.466969] e820: reserve RAM buffer [mem 0x6fb93018-0x6fffffff]
[    0.466972] e820: reserve RAM buffer [mem 0x6fba1018-0x6fffffff]
[    0.466974] e820: reserve RAM buffer [mem 0x78082000-0x7bffffff]
[    0.466976] e820: reserve RAM buffer [mem 0x8614e000-0x87ffffff]
[    0.466979] e820: reserve RAM buffer [mem 0x863bc000-0x87ffffff]
[    0.466981] e820: reserve RAM buffer [mem 0x89110000-0x8bffffff]
[    0.466983] e820: reserve RAM buffer [mem 0x8a5f9000-0x8bffffff]
[    0.466986] e820: reserve RAM buffer [mem 0x8afff000-0x8bffffff]
[    0.466988] e820: reserve RAM buffer [mem 0x16f000000-0x16fffffff]
[    0.467584] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.467599] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.470781] clocksource: Switched to clocksource tsc-early
[    0.488879] VFS: Disk quotas dquot_6.6.0
[    0.488903] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.489097] AppArmor: AppArmor Filesystem Enabled
[    0.489151] pnp: PnP ACPI init
[    0.489612] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.489619] system 00:00: [io  0xffff] has been reserved
[    0.489623] system 00:00: [io  0xffff] has been reserved
[    0.489626] system 00:00: [io  0xffff] has been reserved
[    0.489629] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.489632] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.489635] system 00:00: [io  0x3322-0x3323] has been reserved
[    0.489953] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.490650] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.490655] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.490658] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.490661] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[    0.490667] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.490670] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.490674] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.490677] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.490681] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.490684] system 00:04: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.490782] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.490787] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.490790] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.490794] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.490797] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.490800] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.490804] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.491497] system 00:06: [io  0xff00-0xfffe] has been reserved
[    0.494564] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.494569] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.494572] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.496226] pnp: PnP ACPI: found 8 devices
[    0.503491] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.503605] NET: Registered PF_INET protocol family
[    0.503691] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.504740] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.504780] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.504825] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.504924] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.504984] TCP: Hash tables configured (established 32768 bind 32768)
[    0.505077] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[    0.505111] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.505132] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.505203] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.505215] NET: Registered PF_XDP protocol family
[    0.505232] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.505241] pci 0000:00:1c.0:   bridge window [mem 0xdfa00000-0xdfafffff]
[    0.505252] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.505256] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.505262] pci 0000:00:1c.4:   bridge window [mem 0xdf000000-0xdf9fffff]
[    0.505266] pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[    0.505274] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.505278] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.505281] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
[    0.505284] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.505287] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.505290] pci_bus 0000:01: resource 1 [mem 0xdfa00000-0xdfafffff]
[    0.505293] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.505296] pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf9fffff]
[    0.505299] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
[    0.506030] PCI: CLS 64 bytes, default 64
[    0.506057] DMAR: ACPI device "device:64" under DMAR at fed91000 as 00:15.0
[    0.506085] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.506087] software IO TLB: mapped [mem 0x000000008214e000-0x000000008614e000] (64MB)
[    0.506112] Trying to unpack rootfs image as initramfs...
[    0.507223] Initialise system trusted keyrings
[    0.507236] Key type blacklist registered
[    0.507298] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.510006] zbud: loaded
[    0.510492] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.510758] fuse: init (API version 7.34)
[    0.511035] integrity: Platform Keyring initialized
[    0.526067] Key type asymmetric registered
[    0.526070] Asymmetric key parser 'x509' registered
[    0.526096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.526154] io scheduler mq-deadline registered
[    0.526984] pcieport 0000:00:1c.0: AER: enabled with IRQ 122
[    0.527410] pcieport 0000:00:1c.4: AER: enabled with IRQ 123
[    0.527546] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.532138] ACPI: AC: AC Adapter [AC] (on-line)
[    0.532250] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.532307] ACPI: button: Power Button [PWRB]
[    0.532359] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.532402] ACPI: button: Sleep Button [SLPB]
[    0.532455] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.532495] ACPI: button: Lid Switch [LID0]
[    0.532563] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.532603] ACPI: button: Power Button [PWRF]
[    0.533757] thermal LNXTHERM:00: registered as thermal_zone0
[    0.533762] ACPI: thermal: Thermal Zone [TZ0] (25 C)
[    0.534169] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.535119] ACPI: battery: Slot [BAT0] (battery present)
[    0.537637] Linux agpgart interface v0.103
[    0.555626] loop: module loaded
[    0.556174] tun: Universal TUN/TAP device driver, 1.6
[    0.556265] PPP generic driver version 2.4.2
[    0.556344] VFIO - User Level meta-driver version: 0.3
[    0.556505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.556511] ehci-pci: EHCI PCI platform driver
[    0.556555] ehci-platform: EHCI generic platform driver
[    0.556569] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.556573] ohci-pci: OHCI PCI platform driver
[    0.556587] ohci-platform: OHCI generic platform driver
[    0.556598] uhci_hcd: USB Universal Host Controller Interface driver
[    0.556721] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.556726] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.557488] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.557717] mousedev: PS/2 mouse device common for all mice
[    0.558092] rtc_cmos 00:01: RTC can wake from S4
[    0.558805] rtc_cmos 00:01: registered as rtc0
[    0.558952] rtc_cmos 00:01: setting system clock to 2023-11-09T17:02:50 UTC (1699549370)
[    0.558992] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[    0.559007] i2c_dev: i2c /dev entries driver
[    0.559366] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    0.559411] device-mapper: uevent: version 1.0.3
[    0.559490] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.559525] platform eisa.0: Probing EISA bus 0
[    0.559529] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.559531] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.559534] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.559536] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.559539] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.559541] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.559543] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.559545] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.559548] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.559551] platform eisa.0: EISA: Detected 0 cards
[    0.559562] intel_pstate: Intel P-state driver initializing
[    0.560221] intel_pstate: HWP enabled
[    0.560461] ledtrig-cpu: registered to indicate activity on CPUs
[    0.560487] efifb: probing for efifb
[    0.560508] efifb: showing boot graphics
[    0.562052] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.562077] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[    0.562079] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.562081] efifb: scrolling: redraw
[    0.562082] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.562193] Console: switching to colour frame buffer device 128x48
[    0.564017] fb0: EFI VGA frame buffer device
[    0.564024] EFI Variables Facility v0.08 2004-May-17
[    0.585498] intel_pmc_core INT33A1:00:  initialized
[    0.585559] drop_monitor: Initializing network drop monitor service
[    0.585696] NET: Registered PF_INET6 protocol family
[    1.133184] Freeing initrd memory: 111908K
[    1.139074] Segment Routing with IPv6
[    1.139085] In-situ OAM (IOAM) with IPv6
[    1.139108] NET: Registered PF_PACKET protocol family
[    1.139237] Key type dns_resolver registered
[    1.139932] microcode: sig=0x806ea, pf=0x80, revision=0xf4
[    1.140165] microcode: Microcode Update Driver: v2.2.
[    1.140169] IPI shorthand broadcast: enabled
[    1.140182] sched_clock: Marking stable (1139352089, 518593)->(1146392647, -6521965)
[    1.140499] registered taskstats version 1
[    1.141223] Loading compiled-in X.509 certificates
[    1.142023] Loaded X.509 cert 'Build time autogenerated kernel key: 690a7cdcd22f7b13afd98ca1ec1cfae2aecc1a84'
[    1.142468] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[    1.142904] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[    1.142906] blacklist: Loading compiled-in revocation X.509 certificates
[    1.142925] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[    1.142937] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[    1.142950] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[    1.142962] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[    1.142974] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[    1.142986] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[    1.142998] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[    1.143010] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[    1.143171] zswap: loaded using pool lzo/zbud
[    1.143734] Key type .fscrypt registered
[    1.143735] Key type fscrypt-provisioning registered
[    1.144039] Key type trusted registered
[    1.146694] Key type encrypted registered
[    1.146698] AppArmor: AppArmor sha1 policy hashing enabled
[    1.148525] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
[    1.149162] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    1.149166] Loading compiled-in module X.509 certificates
[    1.149617] Loaded X.509 cert 'Build time autogenerated kernel key: 690a7cdcd22f7b13afd98ca1ec1cfae2aecc1a84'
[    1.149618] ima: Allocated hash algorithm: sha1
[    1.186639] ima: No architecture policies found
[    1.186648] evm: Initialising EVM extended attributes:
[    1.186649] evm: security.selinux
[    1.186650] evm: security.SMACK64
[    1.186651] evm: security.SMACK64EXEC
[    1.186652] evm: security.SMACK64TRANSMUTE
[    1.186652] evm: security.SMACK64MMAP
[    1.186653] evm: security.apparmor
[    1.186654] evm: security.ima
[    1.186655] evm: security.capability
[    1.186655] evm: HMAC attrs: 0x1
[    1.186939] PM:   Magic number: 15:471:36
[    1.186948] bdi 7:1: hash matches
[    1.186951] misc loop-control: hash matches
[    1.187186] RAS: Correctable Errors collector initialized.
[    1.188468] Freeing unused decrypted memory: 2036K
[    1.189066] Freeing unused kernel image (initmem) memory: 3356K
[    1.212993] Write protecting the kernel read-only data: 30720k
[    1.214258] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.214920] Freeing unused kernel image (rodata/data gap) memory: 1416K
[    1.263731] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.263732] x86/mm: Checking user space page tables
[    1.308704] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.308708] Run /init as init process
[    1.308709]   with arguments:
[    1.308710]     /init
[    1.308711]     splash
[    1.308712]   with environment:
[    1.308712]     HOME=/
[    1.308713]     TERM=linux
[    1.308714]     BOOT_IMAGE=/boot/vmlinuz-5.15.0-88-generic
[    1.408531] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.408553] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.409610] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    1.410448] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002)
[    1.410645] ahci 0000:00:17.0: version 3.0
[    1.412151] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.412157] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.412160] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.412170] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    1.412194] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.412197] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.412199] usb usb1: Product: xHCI Host Controller
[    1.412201] usb usb1: Manufacturer: Linux 5.15.0-88-generic xhci-hcd
[    1.412202] usb usb1: SerialNumber: 0000:00:14.0
[    1.412268] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.412305] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.412468] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[    1.412473] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.412558] hub 1-0:1.0: USB hub found
[    1.412574] hub 1-0:1.0: 12 ports detected
[    1.412582] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    1.413654] hid: raw HID events driver (C) Jiri Kosina
[    1.419927] cryptd: max_cpu_qlen set to 1000
[    1.425622] AVX2 version of gcm_enc/dec engaged.
[    1.425680] AES CTR mode by8 optimization enabled
[    1.427530] i2c i2c-0: 1/2 memory slots populated (from DMI)
[    1.432332] i2c i2c-0: Successfully instantiated SPD at 0x50
[    1.436395] scsi host0: ahci
[    1.438388] scsi host1: ahci
[    1.438461] ata1: SATA max UDMA/133 abar m2048@0xdfb2b000 port 0xdfb2b100 irq 126
[    1.438463] ata2: DUMMY
[    1.438706] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    1.438710] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.438713] usb usb2: Product: xHCI Host Controller
[    1.438715] usb usb2: Manufacturer: Linux 5.15.0-88-generic xhci-hcd
[    1.438721] usb usb2: SerialNumber: 0000:00:14.0
[    1.438876] hub 2-0:1.0: USB hub found
[    1.438893] hub 2-0:1.0: 6 ports detected
[    1.439141] usb: port power management may be unreliable
[    1.447474] r8169 0000:02:00.1 eth0: RTL8411b, 80:fa:5b:5b:7d:c2, XID 5c8, IRQ 127
[    1.447479] r8169 0000:02:00.1 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.512583] tsc: Refined TSC clocksource calibration: 1799.998 MHz
[    1.512591] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f227af07c, max_idle_ns: 440795246167 ns
[    1.512646] clocksource: Switched to clocksource tsc
[    1.750127] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.772810] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    1.811840] ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[    1.811854] ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[    1.883034] ata1.00: ATA-10: ST1000LX015-1U7172, SDM1, max UDMA/133
[    1.892404] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.925309] usb 1-1: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    1.925323] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.925329] usb 1-1: Product: USB Optical Mouse
[    1.925334] usb 1-1: Manufacturer: Logitech
[    1.954974] ata1.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out
[    1.954988] ata1.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out
[    2.035339] ata1.00: configured for UDMA/133
[    2.045054] scsi 0:0:0:0: Direct-Access     ATA      ST1000LX015-1U71 SDM1 PQ: 0 ANSI: 5
[    2.045842] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.045851] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.045859] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.045889] sd 0:0:0:0: [sda] Write Protect is off
[    2.045897] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.045937] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.052603] usb 1-4: new low-speed USB device number 3 using xhci_hcd
[    2.115495]  sda: sda1 sda2
[    2.116225] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.122083] r8169 0000:02:00.1 ens1f1: renamed from eth0
[    2.123907] input: MSFT0001:01 04F3:308D Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-MSFT0001:01/0018:04F3:308D.0001/input/input5
[    2.124006] input: MSFT0001:01 04F3:308D Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-MSFT0001:01/0018:04F3:308D.0001/input/input7
[    2.124083] hid-generic 0018:04F3:308D.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 04F3:308D] on i2c-MSFT0001:01
[    2.184308] Console: switching to colour dummy device 80x25
[    2.184361] i915 0000:00:02.0: vgaarb: deactivate vga console
[    2.187014] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.187341] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    2.217418] usb 1-4: New USB device found, idVendor=09da, idProduct=2268, bcdDevice= 1.02
[    2.217422] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.217423] usb 1-4: Product: USB Keyboard
[    2.217425] usb 1-4: Manufacturer: SONiX
[    2.236511] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[    2.236516] i915 0000:00:02.0: [drm] [ENCODER:125:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
[    2.262206] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    2.264462] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.265551] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    2.320023] Registered IR keymap rc-cec
[    2.320125] rc rc0: DP-2 as /devices/pci0000:00/0000:00:02.0/rc/rc0
[    2.320238] input: DP-2 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input9
[    2.344859] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[    2.434992] fbcon: i915drmfb (fb0) is primary device
[    2.502942] usb 1-5: New USB device found, idVendor=064e, idProduct=3410, bcdDevice= 0.11
[    2.502955] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.502961] usb 1-5: Product: SuYin USB2.0 RGBIR Camera
[    2.502966] usb 1-5: Manufacturer: SuYin
[    2.502970] usb 1-5: SerialNumber: HF2066-P98B-OV09-REV0102
[    2.632824] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[    2.783422] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[    2.783435] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.797974] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C077.0002/input/input10
[    2.798087] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0
[    2.802028] input: SONiX USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:09DA:2268.0003/input/input11
[    2.861316] hid-generic 0003:09DA:2268.0003: input,hidraw2: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-0000:00:14.0-4/input0
[    2.865694] input: SONiX USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:09DA:2268.0004/input/input12
[    2.925092] input: SONiX USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:09DA:2268.0004/input/input13
[    2.925561] hid-generic 0003:09DA:2268.0004: input,hidraw3: USB HID v1.11 Device [SONiX USB Keyboard] on usb-0000:00:14.0-4/input1
[    2.925772] usbcore: registered new interface driver usbhid
[    2.925779] usbhid: USB HID core driver
[    3.851150] Console: switching to colour frame buffer device 240x67
[    3.871454] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    4.744560] raid6: avx2x4   gen() 34411 MB/s
[    4.812562] raid6: avx2x4   xor() 13000 MB/s
[    4.880559] raid6: avx2x2   gen() 35278 MB/s
[    4.948559] raid6: avx2x2   xor() 22107 MB/s
[    5.016559] raid6: avx2x1   gen() 22068 MB/s
[    5.084563] raid6: avx2x1   xor() 14683 MB/s
[    5.152557] raid6: sse2x4   gen() 15076 MB/s
[    5.220559] raid6: sse2x4   xor()  8921 MB/s
[    5.288560] raid6: sse2x2   gen() 15295 MB/s
[    5.356559] raid6: sse2x2   xor()  9579 MB/s
[    5.424560] raid6: sse2x1   gen() 12923 MB/s
[    5.492581] raid6: sse2x1   xor()  6574 MB/s
[    5.492582] raid6: using algorithm avx2x2 gen() 35278 MB/s
[    5.492583] raid6: .... xor() 22107 MB/s, rmw enabled
[    5.492584] raid6: using avx2x2 recovery algorithm
[    5.496148] xor: automatically using best checksumming function   avx       
[    5.523699] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[    5.864538] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    8.792397] systemd[1]: Inserted module 'autofs4'
[    9.106040] systemd[1]: systemd 249.11-0ubuntu3.11 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    9.125258] systemd[1]: Detected architecture x86-64.
[    9.126832] systemd[1]: Hostname set to <laptop>.
[   15.654242] systemd[1]: Queued start job for default target Graphical Interface.
[   15.658497] systemd[1]: Created slice Slice /system/modprobe.
[   15.659857] systemd[1]: Created slice Slice /system/systemd-fsck.
[   15.661032] systemd[1]: Created slice User and Session Slice.
[   15.661348] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   15.661985] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   15.662204] systemd[1]: Reached target User and Group Name Lookups.
[   15.662287] systemd[1]: Reached target Remote File Systems.
[   15.662340] systemd[1]: Reached target Slice Units.
[   15.662442] systemd[1]: Reached target Local Verity Protected Volumes.
[   15.662722] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   15.663130] systemd[1]: Listening on LVM2 poll daemon socket.
[   15.663480] systemd[1]: Listening on Syslog Socket.
[   15.666659] systemd[1]: Listening on Process Core Dump Socket.
[   15.666901] systemd[1]: Listening on fsck to fsckd communication Socket.
[   15.667040] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   15.667537] systemd[1]: Listening on Journal Audit Socket.
[   15.667797] systemd[1]: Listening on Journal Socket (/dev/log).
[   15.668093] systemd[1]: Listening on Journal Socket.
[   15.675607] systemd[1]: Listening on udev Control Socket.
[   15.675887] systemd[1]: Listening on udev Kernel Socket.
[   15.677537] systemd[1]: Mounting Huge Pages File System...
[   15.678939] systemd[1]: Mounting POSIX Message Queue File System...
[   15.680379] systemd[1]: Mounting Kernel Debug File System...
[   15.681868] systemd[1]: Mounting Kernel Trace File System...
[   15.684685] systemd[1]: Starting Journal Service...
[   15.684991] systemd[1]: Finished Availability of block devices.
[   15.686584] systemd[1]: Starting Set the console keyboard layout...
[   15.687986] systemd[1]: Starting Create List of Static Device Nodes...
[   15.689210] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   15.690359] systemd[1]: Starting Load Kernel Module configfs...
[   15.691522] systemd[1]: Starting Load Kernel Module drm...
[   15.692949] systemd[1]: Starting Load Kernel Module efi_pstore...
[   15.694251] systemd[1]: Starting Load Kernel Module fuse...
[   15.694489] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   15.872512] systemd[1]: Starting Load Kernel Modules...
[   15.875565] systemd[1]: Starting Remount Root and Kernel File Systems...
[   15.878656] systemd[1]: Starting Coldplug All udev Devices...
[   15.885662] systemd[1]: Mounted Huge Pages File System.
[   15.886159] systemd[1]: Mounted POSIX Message Queue File System.
[   15.886535] systemd[1]: Mounted Kernel Debug File System.
[   15.886902] systemd[1]: Mounted Kernel Trace File System.
[   15.888070] systemd[1]: Finished Create List of Static Device Nodes.
[   15.889100] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   15.889827] systemd[1]: Finished Load Kernel Module configfs.
[   15.890720] systemd[1]: modprobe@drm.service: Deactivated successfully.
[   15.891393] systemd[1]: Finished Load Kernel Module drm.
[   15.892258] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   15.892935] systemd[1]: Finished Load Kernel Module fuse.
[   15.896222] systemd[1]: Mounting FUSE Control File System...
[   15.899470] systemd[1]: Mounting Kernel Configuration File System...
[   15.906851] systemd[1]: Mounted FUSE Control File System.
[   15.907161] systemd[1]: Mounted Kernel Configuration File System.
[   15.922000] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[   15.944156] systemd[1]: Started Journal Service.
[   16.005102] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[   16.105697] pstore: Using crash dump compression: deflate
[   16.105718] pstore: Registered efi as persistent store backend
[   16.318558] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[   16.323165] systemd-journald[367]: Received client request to flush runtime journal.
[   16.401606] lp: driver loaded but no devices found
[   16.604075] ppdev: user-space parallel port driver
[   30.233038] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   30.233042] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   30.233044] RAPL PMU: hw unit of domain package 2^-14 Joules
[   30.233045] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   30.233047] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   30.233048] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   30.331919] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   30.332089] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   30.697114] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
[   30.821504] Intel(R) Wireless WiFi driver for Linux
[   30.821590] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
[   30.822143] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   30.896258] input: MSFT0001:01 04F3:308D Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-MSFT0001:01/0018:04F3:308D.0001/input/input14
[   30.896687] input: MSFT0001:01 04F3:308D Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-MSFT0001:01/0018:04F3:308D.0001/input/input16
[   30.896946] hid-multitouch 0018:04F3:308D.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 04F3:308D] on i2c-MSFT0001:01
[   31.033029] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[   31.432544] iwlwifi 0000:01:00.0: loaded firmware version 36.ca7b901d.0 8265-36.ucode op_mode iwlmvm
[   31.488428] intel_tcc_cooling: Programmable TCC Offset detected
[   31.544829] intel_rapl_common: Found RAPL domain package
[   31.544842] intel_rapl_common: Found RAPL domain core
[   31.544846] intel_rapl_common: Found RAPL domain uncore
[   31.544851] intel_rapl_common: Found RAPL domain dram
[   31.544855] intel_rapl_common: Found RAPL domain psys
[   32.230241] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   32.230402] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   32.373378] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[   32.380331] thermal thermal_zone3: failed to read out thermal zone (-61)
[   32.416129] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   32.416143] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   32.416151] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   32.416159] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   32.416163] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   32.416168] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   32.416173] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   32.432641] iwlwifi 0000:01:00.0: base HW address: 38:de:ad:65:95:8c
[   32.469786] snd_hda_codec_hdmi hdaudioC0D2: Monitor plugged-in, Failed to power up codec ret=[-13]
[   32.489785] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[   32.490085] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[   32.490352] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[   32.490607] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[   32.490925] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[   32.491136] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[   32.491330] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[   32.507192] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   32.683680] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[   40.004269] audit: type=1400 audit(1699549409.937:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=667 comm="apparmor_parser"
[   40.004274] audit: type=1400 audit(1699549409.937:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=667 comm="apparmor_parser"
[   40.005120] audit: type=1400 audit(1699549409.941:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=671 comm="apparmor_parser"
[   40.005123] audit: type=1400 audit(1699549409.941:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=671 comm="apparmor_parser"
[   40.005126] audit: type=1400 audit(1699549409.941:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=671 comm="apparmor_parser"
[   40.032608] audit: type=1400 audit(1699549409.969:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=666 comm="apparmor_parser"
[   40.042418] audit: type=1400 audit(1699549409.977:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/redshift" pid=672 comm="apparmor_parser"
[   40.049734] audit: type=1400 audit(1699549409.985:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="tcpdump" pid=678 comm="apparmor_parser"
[   40.152178] audit: type=1400 audit(1699549410.085:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=669 comm="apparmor_parser"
[   40.152182] audit: type=1400 audit(1699549410.085:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=669 comm="apparmor_parser"
[   40.243697] Bluetooth: Core ver 2.22
[   40.243731] NET: Registered PF_BLUETOOTH protocol family
[   40.243735] Bluetooth: HCI device and connection manager initialized
[   40.243744] Bluetooth: HCI socket layer initialized
[   40.243750] Bluetooth: L2CAP socket layer initialized
[   40.243757] Bluetooth: SCO socket layer initialized
[   40.364365] mc: Linux media interface: v0.10
[   40.507355] videodev: Linux video capture interface: v2.00
[   40.893315] usbcore: registered new interface driver btusb
[   40.894785] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[   40.895739] Bluetooth: hci0: Device revision is 16
[   40.895748] Bluetooth: hci0: Secure boot is enabled
[   40.895752] Bluetooth: hci0: OTP lock is enabled
[   40.895755] Bluetooth: hci0: API lock is enabled
[   40.895758] Bluetooth: hci0: Debug lock is disabled
[   40.895762] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[   40.952227] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[   41.025450] usb 1-5: Found UVC 1.00 device SuYin USB2.0 RGBIR Camera (064e:3410)
[   41.044370] input: SuYin USB2.0 RGBIR Camera: SuYi as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input24
[   41.044484] usbcore: registered new interface driver uvcvideo
[   42.583502] Bluetooth: hci0: Waiting for firmware download to complete
[   42.583664] Bluetooth: hci0: Firmware loaded in 1593189 usecs
[   42.583832] Bluetooth: hci0: Waiting for device to boot
[   42.596643] Bluetooth: hci0: Device booted in 12618 usecs
[   42.682776] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[   42.685713] Bluetooth: hci0: Applying Intel DDC parameters completed
[   42.686676] Bluetooth: hci0: Reading supported features failed (-16)
[   42.687672] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021
[   54.221360] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   54.221370] Bluetooth: BNEP filters: protocol multicast
[   54.221383] Bluetooth: BNEP socket layer initialized
[   54.283953] NET: Registered PF_ALG protocol family
[   77.052772] kauditd_printk_skb: 19 callbacks suppressed
[   77.052776] audit: type=1400 audit(1699549446.989:31): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1095 comm="cupsd" capability=12  capname="net_admin"
[   79.543139] audit: type=1400 audit(1699549449.477:32): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1211 comm="cups-browsed" capability=23  capname="sys_nice"
[   80.272638] Generic FE-GE Realtek PHY r8169-0-201:00: attached PHY driver (mii_bus:phy_addr=r8169-0-201:00, irq=MAC)
[   80.460849] r8169 0000:02:00.1 ens1f1: Link is Down
[   85.336670] wlp1s0: authenticate with dc:00:b0:d4:7f:1c
[   85.346099] wlp1s0: send auth to dc:00:b0:d4:7f:1c (try 1/3)
[   85.353136] wlp1s0: authenticated
[   85.356620] wlp1s0: associate with dc:00:b0:d4:7f:1c (try 1/3)
[   85.358525] wlp1s0: RX AssocResp from dc:00:b0:d4:7f:1c (capab=0x1111 status=0 aid=2)
[   85.361632] wlp1s0: associated
[   85.589016] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by dc:00:b0:d4:7f:1c
[   85.617142] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  113.517110] Bluetooth: RFCOMM TTY layer initialized
[  113.517127] Bluetooth: RFCOMM socket layer initialized
[  113.517143] Bluetooth: RFCOMM ver 1.11

journalctl -xe ne donne rien en rouge (tout en vert)

sudo smartctl -a /dev/sda me donne la sortie suivante. En sachant que l’application graphique disque dit que mon disque est sain, avec 264 secteurs endommagés.

smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-88-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate FireCuda 2.5
Device Model:     ST1000LX015-1U7172
Serial Number:    ZDEC4GB4
LU WWN Device Id: 5 000c50 0b2b067ef
Firmware Version: SDM1
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Nov  9 18:20:52 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 164) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   081   041   006    Pre-fail  Always       -       132375202
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   094   094   020    Old_age   Always       -       6807
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       264
  7 Seek_Error_Rate         0x000f   081   060   045    Pre-fail  Always       -       133507176
  9 Power_On_Hours          0x0032   082   082   000    Old_age   Always       -       16534 (176 239 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   096   096   020    Old_age   Always       -       4511
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       30065229906
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   071   048   040    Old_age   Always       -       29 (Min/Max 17/29)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       652
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       289
193 Load_Cycle_Count        0x0032   094   094   000    Old_age   Always       -       13998
194 Temperature_Celsius     0x0022   029   052   000    Old_age   Always       -       29 (0 12 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       1
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       16315h+09m+06.911s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       52659486814
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       105441013662
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 236 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 236 occurred at disk power-on lifetime: 12341 hours (514 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 18 ff ff ff 4f 00      04:54:01.084  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      04:54:01.084  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      04:54:01.084  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      04:54:01.084  READ FPDMA QUEUED
  60 00 30 ff ff ff 4f 00      04:54:01.084  READ FPDMA QUEUED

Error 235 occurred at disk power-on lifetime: 1012 hours (42 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 10 ff ff ff 4f 00      00:00:32.533  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:29.849  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:29.848  READ FPDMA QUEUED
  60 00 18 ff ff ff 4f 00      00:00:29.844  READ FPDMA QUEUED
  60 00 10 ff ff ff 4f 00      00:00:29.844  READ FPDMA QUEUED

Error 234 occurred at disk power-on lifetime: 1008 hours (42 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      00:00:25.676  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:25.669  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:25.668  READ FPDMA QUEUED
  60 00 10 ff ff ff 4f 00      00:00:25.668  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:25.668  READ FPDMA QUEUED

Error 233 occurred at disk power-on lifetime: 1003 hours (41 days + 19 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      00:00:23.522  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:23.522  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:23.522  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:23.517  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      00:00:23.517  READ FPDMA QUEUED

Error 232 occurred at disk power-on lifetime: 1001 hours (41 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      00:00:30.983  READ FPDMA QUEUED
  60 00 50 ff ff ff 4f 00      00:00:30.983  READ FPDMA QUEUED
  60 00 18 ff ff ff 4f 00      00:00:30.982  READ FPDMA QUEUED
  60 00 30 ff ff ff 4f 00      00:00:30.981  READ FPDMA QUEUED
  60 00 48 ff ff ff 4f 00      00:00:30.965  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     12228         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

systemctl list-dependencies graphical.target me donne (le soucis de casper semble propre à Mint, en tout cas ce n’est pas que le cas chez moi) :

graphical.target
● ├─accounts-daemon.service
○ ├─e2scrub_reap.service
● ├─hddtemp.service
● ├─lightdm.service
○ ├─systemd-update-utmp-runlevel.service
● ├─udisks2.service
● └─multi-user.target
○   ├─anacron.service
●   ├─apache2.service
●   ├─avahi-daemon.service
●   ├─binfmt-support.service
○   ├─blueman-mechanism.service
×   ├─casper-md5check.service
●   ├─console-setup.service
●   ├─cron.service
●   ├─cups-browsed.service
●   ├─cups.path
●   ├─cups.service
●   ├─dbus.service
○   ├─dmesg.service
○   ├─dns-clean.service
○   ├─grub-common.service
○   ├─grub-initrd-fallback.service
●   ├─hddtemp.service
●   ├─irqbalance.service
●   ├─kerneloops.service
●   ├─lm-sensors.service
○   ├─mintsystem.service
○   ├─mintupdate-automation-cleanup.service
●   ├─ModemManager.service
●   ├─networkd-dispatcher.service
●   ├─networking.service
●   ├─NetworkManager.service
●   ├─nmbd.service
●   ├─openvpn.service
●   ├─plymouth-quit-wait.service
○   ├─plymouth-quit.service
○   ├─rsync.service
●   ├─rsyslog.service
○   ├─secureboot-db.service
●   ├─smartmontools.service
●   ├─smbd.service
●   ├─systemd-ask-password-wall.path
●   ├─systemd-logind.service
●   ├─systemd-resolved.service
○   ├─systemd-update-utmp-runlevel.service
●   ├─systemd-user-sessions.service
●   ├─thermald.service
●   ├─tlp.service
○   ├─ua-reboot-cmds.service
○   ├─ubuntu-advantage.service
●   ├─ubuntu-system-adjustments.service
●   ├─ufw.service
●   ├─unbound.service
●   ├─wpa_supplicant.service
●   ├─basic.target
●   │ ├─-.mount
○   │ ├─tmp.mount
●   │ ├─paths.target
●   │ │ └─acpid.path
●   │ ├─slices.target
●   │ │ ├─-.slice
●   │ │ └─system.slice
●   │ ├─sockets.target
●   │ │ ├─acpid.socket
●   │ │ ├─avahi-daemon.socket
●   │ │ ├─cups.socket
●   │ │ ├─dbus.socket
●   │ │ ├─dm-event.socket
●   │ │ ├─systemd-coredump.socket
●   │ │ ├─systemd-initctl.socket
●   │ │ ├─systemd-journald-audit.socket
●   │ │ ├─systemd-journald-dev-log.socket
●   │ │ ├─systemd-journald.socket
●   │ │ ├─systemd-udevd-control.socket
●   │ │ ├─systemd-udevd-kernel.socket
●   │ │ └─uuidd.socket
●   │ ├─sysinit.target
●   │ │ ├─apparmor.service
●   │ │ ├─blk-availability.service
●   │ │ ├─dev-hugepages.mount
●   │ │ ├─dev-mqueue.mount
●   │ │ ├─finalrd.service
●   │ │ ├─keyboard-setup.service
●   │ │ ├─kmod-static-nodes.service
●   │ │ ├─lvm2-lvmpolld.socket
●   │ │ ├─lvm2-monitor.service
●   │ │ ├─plymouth-read-write.service
●   │ │ ├─plymouth-start.service
●   │ │ ├─proc-sys-fs-binfmt_misc.automount
●   │ │ ├─resolvconf.service
●   │ │ ├─setvtrgb.service
●   │ │ ├─sys-fs-fuse-connections.mount
●   │ │ ├─sys-kernel-config.mount
●   │ │ ├─sys-kernel-debug.mount
●   │ │ ├─sys-kernel-tracing.mount
○   │ │ ├─systemd-ask-password-console.path
●   │ │ ├─systemd-binfmt.service
○   │ │ ├─systemd-boot-system-token.service
●   │ │ ├─systemd-journal-flush.service
●   │ │ ├─systemd-journald.service
○   │ │ ├─systemd-machine-id-commit.service
●   │ │ ├─systemd-modules-load.service
○   │ │ ├─systemd-pstore.service
●   │ │ ├─systemd-random-seed.service
●   │ │ ├─systemd-sysctl.service
●   │ │ ├─systemd-sysusers.service
●   │ │ ├─systemd-timesyncd.service
●   │ │ ├─systemd-tmpfiles-setup-dev.service
●   │ │ ├─systemd-tmpfiles-setup.service
●   │ │ ├─systemd-udev-trigger.service
●   │ │ ├─systemd-udevd.service
●   │ │ ├─systemd-update-utmp.service
●   │ │ ├─cryptsetup.target
●   │ │ ├─local-fs.target
●   │ │ │ ├─-.mount
●   │ │ │ ├─boot-efi.mount
○   │ │ │ ├─systemd-fsck-root.service
●   │ │ │ └─systemd-remount-fs.service
●   │ │ ├─swap.target
●   │ │ │ └─swapfile.swap
●   │ │ └─veritysetup.target
●   │ └─timers.target
●   │   ├─anacron.timer
●   │   ├─apt-daily-upgrade.timer
●   │   ├─apt-daily.timer
●   │   ├─dpkg-db-backup.timer
●   │   ├─e2scrub_all.timer
●   │   ├─fstrim.timer
●   │   ├─fwupd-refresh.timer
●   │   ├─logrotate.timer
●   │   ├─man-db.timer
●   │   ├─mintupdate-automation-autoremove.timer
●   │   ├─mintupdate-automation-upgrade.timer
●   │   ├─motd-news.timer
●   │   ├─phpsessionclean.timer
●   │   ├─plocate-updatedb.timer
●   │   ├─systemd-tmpfiles-clean.timer
○   │   ├─ua-timer.timer
●   │   ├─update-notifier-download.timer
●   │   └─update-notifier-motd.timer
●   ├─getty.target
○   │ ├─getty-static.service
●   │ └─getty@tty1.service
●   └─remote-fs.target

systemctl list-dependencies nmbd.service me donne : 

nmbd.service
● ├─system.slice
● ├─network-online.target
● │ ├─networking.service
● │ └─NetworkManager-wait-online.service
● └─sysinit.target
●   ├─apparmor.service
●   ├─blk-availability.service
●   ├─dev-hugepages.mount
●   ├─dev-mqueue.mount
●   ├─finalrd.service
●   ├─keyboard-setup.service
●   ├─kmod-static-nodes.service
●   ├─lvm2-lvmpolld.socket
●   ├─lvm2-monitor.service
●   ├─plymouth-read-write.service
●   ├─plymouth-start.service
●   ├─proc-sys-fs-binfmt_misc.automount
●   ├─resolvconf.service
●   ├─setvtrgb.service
●   ├─sys-fs-fuse-connections.mount
●   ├─sys-kernel-config.mount
●   ├─sys-kernel-debug.mount
●   ├─sys-kernel-tracing.mount
○   ├─systemd-ask-password-console.path
●   ├─systemd-binfmt.service
○   ├─systemd-boot-system-token.service
●   ├─systemd-journal-flush.service
●   ├─systemd-journald.service
○   ├─systemd-machine-id-commit.service
●   ├─systemd-modules-load.service
○   ├─systemd-pstore.service
●   ├─systemd-random-seed.service
●   ├─systemd-sysctl.service
●   ├─systemd-sysusers.service
●   ├─systemd-timesyncd.service
●   ├─systemd-tmpfiles-setup-dev.service
●   ├─systemd-tmpfiles-setup.service
●   ├─systemd-udev-trigger.service
●   ├─systemd-udevd.service
●   ├─systemd-update-utmp.service
●   ├─cryptsetup.target
●   ├─local-fs.target
●   │ ├─-.mount
●   │ ├─boot-efi.mount
○   │ ├─systemd-fsck-root.service
●   │ └─systemd-remount-fs.service
●   ├─swap.target
●   │ └─swapfile.swap
●   └─veritysetup.target

systemctl list-dependencies multi-user.target me donne :

multi-user.target
○ ├─anacron.service
● ├─apache2.service
● ├─avahi-daemon.service
● ├─binfmt-support.service
○ ├─blueman-mechanism.service
× ├─casper-md5check.service
● ├─console-setup.service
● ├─cron.service
● ├─cups-browsed.service
● ├─cups.path
● ├─cups.service
● ├─dbus.service
○ ├─dmesg.service
○ ├─dns-clean.service
○ ├─grub-common.service
○ ├─grub-initrd-fallback.service
● ├─hddtemp.service
● ├─irqbalance.service
● ├─kerneloops.service
● ├─lm-sensors.service
○ ├─mintsystem.service
○ ├─mintupdate-automation-cleanup.service
● ├─ModemManager.service
● ├─networkd-dispatcher.service
● ├─networking.service
● ├─NetworkManager.service
● ├─nmbd.service
● ├─openvpn.service
● ├─plymouth-quit-wait.service
○ ├─plymouth-quit.service
○ ├─rsync.service
● ├─rsyslog.service
○ ├─secureboot-db.service
● ├─smartmontools.service
● ├─smbd.service
● ├─systemd-ask-password-wall.path
● ├─systemd-logind.service
● ├─systemd-resolved.service
○ ├─systemd-update-utmp-runlevel.service
● ├─systemd-user-sessions.service
● ├─thermald.service
● ├─tlp.service
○ ├─ua-reboot-cmds.service
○ ├─ubuntu-advantage.service
● ├─ubuntu-system-adjustments.service
● ├─ufw.service
● ├─unbound.service
● ├─wpa_supplicant.service
● ├─basic.target
● │ ├─-.mount
○ │ ├─tmp.mount
● │ ├─paths.target
● │ │ └─acpid.path
● │ ├─slices.target
● │ │ ├─-.slice
● │ │ └─system.slice
● │ ├─sockets.target
● │ │ ├─acpid.socket
● │ │ ├─avahi-daemon.socket
● │ │ ├─cups.socket
● │ │ ├─dbus.socket
● │ │ ├─dm-event.socket
● │ │ ├─systemd-coredump.socket
● │ │ ├─systemd-initctl.socket
● │ │ ├─systemd-journald-audit.socket
● │ │ ├─systemd-journald-dev-log.socket
● │ │ ├─systemd-journald.socket
● │ │ ├─systemd-udevd-control.socket
● │ │ ├─systemd-udevd-kernel.socket
● │ │ └─uuidd.socket
● │ ├─sysinit.target
● │ │ ├─apparmor.service
● │ │ ├─blk-availability.service
● │ │ ├─dev-hugepages.mount
● │ │ ├─dev-mqueue.mount
● │ │ ├─finalrd.service
● │ │ ├─keyboard-setup.service
● │ │ ├─kmod-static-nodes.service
● │ │ ├─lvm2-lvmpolld.socket
● │ │ ├─lvm2-monitor.service
● │ │ ├─plymouth-read-write.service
● │ │ ├─plymouth-start.service
● │ │ ├─proc-sys-fs-binfmt_misc.automount
● │ │ ├─resolvconf.service
● │ │ ├─setvtrgb.service
● │ │ ├─sys-fs-fuse-connections.mount
● │ │ ├─sys-kernel-config.mount
● │ │ ├─sys-kernel-debug.mount
● │ │ ├─sys-kernel-tracing.mount
○ │ │ ├─systemd-ask-password-console.path
● │ │ ├─systemd-binfmt.service
○ │ │ ├─systemd-boot-system-token.service
● │ │ ├─systemd-journal-flush.service
● │ │ ├─systemd-journald.service
○ │ │ ├─systemd-machine-id-commit.service
● │ │ ├─systemd-modules-load.service
○ │ │ ├─systemd-pstore.service
● │ │ ├─systemd-random-seed.service
● │ │ ├─systemd-sysctl.service
● │ │ ├─systemd-sysusers.service
● │ │ ├─systemd-timesyncd.service
● │ │ ├─systemd-tmpfiles-setup-dev.service
● │ │ ├─systemd-tmpfiles-setup.service
● │ │ ├─systemd-udev-trigger.service
● │ │ ├─systemd-udevd.service
● │ │ ├─systemd-update-utmp.service
● │ │ ├─cryptsetup.target
● │ │ ├─local-fs.target
● │ │ │ ├─-.mount
● │ │ │ ├─boot-efi.mount
○ │ │ │ ├─systemd-fsck-root.service
● │ │ │ └─systemd-remount-fs.service
● │ │ ├─swap.target
● │ │ │ └─swapfile.swap
● │ │ └─veritysetup.target
● │ └─timers.target
● │   ├─anacron.timer
● │   ├─apt-daily-upgrade.timer
● │   ├─apt-daily.timer
● │   ├─dpkg-db-backup.timer
● │   ├─e2scrub_all.timer
● │   ├─fstrim.timer
● │   ├─fwupd-refresh.timer
● │   ├─logrotate.timer
● │   ├─man-db.timer
● │   ├─mintupdate-automation-autoremove.timer
● │   ├─mintupdate-automation-upgrade.timer
● │   ├─motd-news.timer
● │   ├─phpsessionclean.timer
● │   ├─plocate-updatedb.timer
● │   ├─systemd-tmpfiles-clean.timer
○ │   ├─ua-timer.timer
● │   ├─update-notifier-download.timer
● │   └─update-notifier-motd.timer
● ├─getty.target
○ │ ├─getty-static.service
● │ └─getty@tty1.service
● └─remote-fs.target
+0 -0

Alors voici les sorties demandées, si vous voyez quelque chose (moi tout me semble bien) :

En effet je ne trouve rien de choquant d’un point de vue système ou matériel. Ton disque dur est un 5400 tours / minutes d’après les données SMART ce qui est effectivement lent, et lors du boot je doute que la partie hybride compense cela, cela devrait être plus visible lors des écritures.

Essaye de désactiver les services mentionnés plus tôt pour voir à quel point cela améliore ta situation.

Si tu ne sais pas le faire, cela se fait avec la commande suivante :

$ sudo systemctl disable <nom_du_service>
+0 -0

Tu peux faire manuellement quand tu as besoin :

$ systemctl start <nom_du_service

Qui lancera le service jusqu’à ce que tu fasses un stop ou quand tu arrêtes la machine. Éventuellement fais un script pour lancer ces commandes quand tu démarres une session de développement pour économiser les ressources quand tu n’en as pas besoin tout en étant rapide à lancer et arrêter. ;)

+4 -0

Merci pour vos retours, j’ai pu désactiver les services évoqués, j’ai gagné quelques dizaines de secondes. Guère impressionnant, mais c’est déjà ça.

Mais comme évoqué, une solution serait un upgrade matériel. Reste à voir si je change uniquement des composants en particulier (SSD, RAM), ou l’ensemble de la machine (qui montre des signes de fatigue, en même temps, en 5 ans et en ayant bien baladé, c’est normal). Il faut que je réfléchisse à la question (usage vs désagrément de la lenteur vs investissement financier).

Une autre piste serait également une réinstallation « propre » de Mint. À force de faire des mises à jour et d’installer/désinstaller des applications, il doit avoir plein de restes qui doivent aussi jouer sur les performances.

Merci pour votre aide. Je mets le sujet en résolu :-)

+0 -0

Merci pour vos retours, j’ai pu désactiver les services évoqués, j’ai gagné quelques dizaines de secondes. Guère impressionnant, mais c’est déjà ça.

Tu étais sur 107s de temps de boot. Si tu gagnes 20s, c’est une amélioration de 20%, pas si mal.

À quoi ressemble la chaîne critique maintenant ? Sont-ce maintenant des services dont tu as bien besoin ? Sinon, peut-être les désactiver, mesurer et recommencer ? (La démarche de profiling+optimisation classique.)

+2 -0
Connectez-vous pour pouvoir poster un message.
Connexion

Pas encore membre ?

Créez un compte en une minute pour profiter pleinement de toutes les fonctionnalités de Zeste de Savoir. Ici, tout est gratuit et sans publicité.
Créer un compte